Technical details
Open Accordion
Size + fit
Open Accordion

Fit guide: Our Nomad Puffer is designed with a loose fit, with plenty of room for other layers underneath. If you prefer a closer fit, we recommend you go for the size down.

Model wears: Patrik Ehlert is 6ft 2 / 189cm with a 40 inch / 101cm chest. Patrik has an athletic build and is wearing the Nomad Puffer in size Large.

Personalised advice: See our size guide for more advice on sizing, or you can ask us for personalised sizing advice here.

Returns and exchanges: Don’t worry if you order something and it doesn’t fit – we have a free, no hassle 30 day return and exchange period.

Fits chest83-9091-9899-106107-114115-122123-130
Fits waist71-7676-8181-8686-9191-9696-101
Fits chest33-3636-3939-4242-4545-4848-51
Fits waist28-3030-3232-3434-3636-3838-40
Size Table Swipe

Swipe to see more

Nomad gear

Nomads know what it takes to survive

For the last 45,000 years, some of the toughest nomads on the planet have been carving out their existence in the snow, ice and sub-zero temperatures of the Arctic Circle. So when we set out to make cold weather gear for unpredictable places, we decided to start with what they’d already learnt. Nomads in the Arctic Circle used what they had around them to make some of the softest clothes ever built – they wore jackets built from seal intestines to keep them dry, and jackets created out of seal skin to stay warm. Even by today’s standards they’re some of the most innovative pieces of clothing humans have ever created.

Nomad gear

Early Arctic rain jackets were made from seal guts

Rain jackets made from seal intestines were used across the Arctic because of their natural water repellency. The intestines would be dried out in long strips, before being sewn together into jackets using sinew thread. They were worn for hunting on land in wet weather and travelling by kayak. But while they were effective at keeping out the rain, they weren’t massively durable. Hunters would go through two or three of them a year.

Nomad gear

The puffer and pants work like a second skin

The aim of the Nomad Puffer and Nomad Puffer Pants is to get back to making cold weather clothing as precisely engineered as early man made it, while protecting you from the elements from head to toe. These early designs would have worked just like a super-soft second skin, regulating your temperature, while protecting you from the cold, wind and rain. We’ve combined a wind resistant and water repellent outer shell with super-compact insulation, hand-dyeing, and double lines of reinforced stitching to recreate the warmth, comfort and performance of the earliest Arctic clothing.

Nomad gear

Garment dyed to make it incredibly soft

To recreate the softness of the earliest Arctic clothing we’ve turned to a process called garment dyeing. While most clothes are dyed with a process called piece dyeing – where huge rolls of fabric are dyed, before being cut and sewn to make clothing – we garment dye every Nomad Puffer. Each puffer is built by hand, and then the whole jacket is submerged in a giant vat of dye to give it its colour and make the material ultra-soft.

Nomad gear

Feels lived-in from the day you get it

By changing the way you dye fabric, you change the way it looks and feels. Garment dyeing clothes after they’ve been built makes the fabric physically softer, so the puffer feels lived-in from the moment you first put it on. The colours you get from garment dyeing also make it look like you’ve been wearing the jacket for the last few years. That’s because when you put the whole piece of clothing in dye, the colours build up in the creases and in the stitching, but come out paler at the edges.

Nomad gear

Each Nomad Puffer will be different

The garment dyeing process involves dyeing the puffers in small batches at very specific temperatures. And the effect of the dyeing can vary from batch to batch, and even from jacket to jacket. This means that no two puffers will ever look exactly the same. But it’s not going to come out bright green. It just means it’ll look like you’ve owned it for years from day one.

Nomad gear

We use super-compact insulation

To keep you warm but still able to move fast, we turned to the same insulation we first used in our Race to Zero Puffer. Sandwiched in between the water repellent outer material and the inner lining is a super-compact synthetic insulation which keeps you as warm as much heavier and thicker jackets. That’s because we compress the insulation down to less than a third of its original size before it’s stitched into the jacket. And while the insulation takes up 70% less space, it retains 80% of its thermal properties.


Our insulation is made from recycled plastic

Instead of pulling feathers out of ducks, we pull plastic out of used plastic bottles and turn them into insulating synthetic fibres. Every single jacket uses 5 half-litre recycled plastic bottles. Staying warm is all about trapping as many pockets of air next to your body as possible, so these synthetic fibres are built to be hollow, which means you’ll automatically have millions of air pockets trapped next to your skin. And as the curl of the fibres traps more air than straight fibres, the microscopic texture of the fibre itself also retains heat.

Nomad gear

How plastic is turned into insulation

To turn recycled plastic bottles into insulation we work with pioneers in thermal insulation based in Milan. They’ve been working on recycled fibres and using plastic bottles in their technology since the 1980s, well before it was the cool or right thing to do. They use a process called mechanical recycling to blend the bottles, eliminating the need for hazardous chemicals and creating synthetic fibres that have the highest loft for the lowest weight, just like down.

Nomad gear

How the insulation performs against down

While down traps heat well, it doesn’t breathe well. So it’s not the ideal option if you’re working hard. If you’re on the move our insulation will do a better job of regulating your body temperature, as it will breathe better and won’t hold onto sweat. It’s also made from a blend of different fibres each with their own ‘multi-shape’ structure. Some are designed for puffiness, others for resilience or thermal efficiency. By making each fibre a different shape, we stop them linking together and clumping like down does when it gets wet.

Nomad gear

Built for comfort

Like all our Nomad gear, the Nomad Puffer is zero effort clothing. Once it’s on you simply forget it’s there. The garment dyeing process makes the material follow your body like a blanket. The super-compact insulation helps keep your temperature stable even when you’re on the move. While vents at the hem, the crossover collar and oversized hood let the jacket quietly get on with its job while you get on with yours.

Nomad gear

Comes with five pockets

The front zip is protected by a storm flap which fastens with metal press studs. You’ll find two deep zipped side pockets that let you tuck in for warmth if a blizzard picks up. On the left upper chest there’s a smaller pocket built with a hidden zip. And there are two more zipped pockets inside the jacket for carrying supplies.

Nomad gear

Designed to be worn with our Nomad gear

The Nomad Puffer is built to work together with our Nomad Puffer Pants. Constructed using the exact same materials and dyeing process, they’re designed to be worn together to keep you comfortable in harsh conditions. If you need to layer up underneath, our Nomad Hoodie and Nomad Sweater are made with ultra-soft alpaca wool capable of coping with everything from blizzards to intense high-altitude sun.

Works well with